Home>Products>Slewing Turntable ring Bearing>232.20.0600.013 Slewing Ring With Flange 547.2x748x56mm
232.20.0600.013 Slewing Ring With Flange 547.2x748x56mm MODELS
Need a CAD or 3D Model?
232.20.0600.013 Slewing Ring With Flange 547.2x748x56mm
category
Slewing Turntable ring Bearing
232.20.0600.013 Slewing Ring With Flange 547.2x748x56mm SPECIFICATIONS
With 72 kN Basic static load rating C0 over 2.7 kN Fatigue load limit Pu 10170 Bearing Rolamentos do Brasil Ltda. full-service stores, our 232.20.0600.013 Slewing Ring With Flange 547.2x748x56mm inventory is extensive and our parts are priced right. within 24 hours. This helps you maximize your productivity by saving time and your hard-earned dollars.
4
- 72 kN
- 2.7 kN
- 361 N/µm
- 16.5
- 12.7 mm
- 0.6 mm
- 150 mm
- 0.73 kg
- Bearing Rolamentos do Brasil Ltda.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Products and services 232.20.0600.013 Slewing Ring With Flange 547.2x748x56mm
- 72 kN
- 2.7 kN
- 361 N/µm
- 16.5
- 12.7 mm
- 0.6 mm
- 150 mm
- 0.73 kg
- 2.3 mm
- 116 mm
4 232.20.0600.013 Slewing Ring With Flange 547.2x748x56mm Codes and sizes
No. | Brand | C | K | A | T | a | G | h | b |
6209NR | Nachi | 400 mm | 6 mm | - | - | - | - | - | 11.1 mm |
1.5D | - | - | - | - | - | - | - | - | - |
[20 | - | - | - | - | - | - | - | - | - |
314-4120 | INA | - | - | - | - | - | - | - | - |
SK320-6 | - | 670 mm | 12 mm | - | - | - | - | - | - |
40Cr | - | - | - | - | - | - | - | - | - |
E39 | - | - | - | - | - | - | - | 42.069 mm | - |
A6 | - | - | - | - | - | - | - | - | - |
606 | - | - | - | - | - | - | - | - | - |
W60/2.5 | - | - | - | - | - | - | - | - | - |
2004-2007 | INA | - | - | - | - | - | - | - | - |
6220-2RS | - | - | - | - | - | - | - | - | - |
N322 | NSK | - | - | - | - | - | - | - | - |
DH220-5 | - | - | - | - | - | - | - | - | - |
7228-BCBM | FAFNIR | - | - | - | - | - | - | 50.8 mm | - |
7783-20-2 | - | 52.375 mm | - | - | - | - | - | - | - |
12'x28'x8' | - | - | - | - | - | - | - | 31.75 mm | - |
GE17 | - | - | - | - | - | - | - | - | - |
4X8 | - | - | - | - | - | - | Tr 420x5 | - | - |
3/4" | - | - | - | - | - | - | - | - | - |
ZX210-3 | - | - | - | - | - | - | - | - | - |
4132-2CS5V | SKF | - | - | - | - | - | - | - | - |
RE15025 Crossed Roller Bearings 150x210x25mm | A1:79.375 mm; Taconite seal:TER 28; Mass pillow block:10.8 kg; H2:25.4 mm; S:3.969 mm; PG:1/8 NPT; Initial grease fill:53.865 g; P90°:30.2 kN; P120°:17.8 kN; R2:15.875 mm; |
PC300-3 Slewing Bearing | Limiting speed:1400 r/min; ra max.:2 mm; b1:7 mm; d:190 mm; Fatigue load limit Pu:132 kN; B:69 mm; Basic dynamic load rating C:605 kN; r1,2 min.:2 mm; Da max.:250 mm; Calculation factor kr:0.25; |
VLI 200844-N Four Point Contact Slewing Ring | d1:56 mm; f:6 mm; d2:69 mm; M:42.5 mm; d:45 mm; B:1.8 mm; Mass lock washer:0.021 kg; |
RE5013 Crossed Roller Bearings 50x80x13mm | Basic Dynamic Radial Load Rating C:410000 N; B:74.00 mm; Accessories:Without Accessories; Fillet Radius ra:4.00 mm; Grease Speed Rating Open/Shielded n1:900 rpm; Basic Static Radial Load Rating Co:710000 N; Oil Speed Rating Open/Shielded n2:1100 rpm; Sealed Speed Rating n3:550 rpm; d:440.000 mm; D:600.0000 mm; |
VLI200744-N Slewing Bearing S-upplier Made In China 648x848x56mm | Ca:67.793 mm; h:46.038 mm; PosiTrac Plus contact element:2 x B10724-44; N1:19.05 mm; Max. speed for PosiTrac Plus seal:2150 r/min; P120°:33.8 kN; Cap bolt, SAE grade:8; da:68.263 mm; RG:3/8 NPT; P90°:55.6 kN; |
China Wind Power Slewing Bearing 013.50.2980.03 Wind Turbine Slewing Bearing | Fatigue load limit Pu:23.6 kN; Limiting speed:5600 r/min; Da max.:100.5 mm; Calculation factor Y:1.8; Dimension series:39500; B:30.162 mm; a:23.379 mm; rb max.:3.3 mm; r1,2 min.:3.5 mm; r3,4 min.:3.3 mm; |
JXR699050 Cross Roller Bearing 370x495x50mm | ra max.:3 mm; Calculation factor kr:0.21; Limiting speed:1100 r/min; r1,2 min.:4 mm; Basic dynamic load rating C:2380 kN; d:420 mm; r3,4 min.:4 mm; Basic static load rating C0:5300 kN; da min.:436 mm; Reference speed:750 r/min; |
XU060111 Crossed Roller Slewing Bearings 76.2x145.79x15.87mm | d:85 mm; Mass shaft washer:1.27 kg; r1,2 min.:1.5 mm; B:13.5 mm; d1:150 mm; |
VSU200844-N Slewing Bearing / Four Point Contact Bearing 772x916x56mm | Height T:42.2 mm; Diameter N:11.5 mm; Basic Dynamic Radial Load Rating C:19500 N; Dimension L:83.0 mm; Height H:142.5 mm; Weight W:0.44 kg; Distance J:116.5 mm; Dimension DA:76.2 mm; Basic Static Radial Load Rating Co:11200 N; Dimension A2:15.0 mm; |
1797/1300G2 Bearing 1300x1705x165mm | rs (min):1 mm; Static (Cor):mm; D:52 mm; with cylindrical bore:8 500 min-1; Dynamic (Cr):mm; Oil:5.620 kN; Pu:46 kN; Grease:46.1 kN; with tapered bore:11 000 min-1; B:18 mm; |
232.20.0600.013 Slewing Ring With Flange 547.2x748x56mm Video
Contact Us
- Bearing Rolamentos do Brasil Ltda.
- AddressAv. das Industrias, 380 - Parque Industrial - CEP 83.820-332 - Fazenda Rio Grande - PR - BRAZIL
- Phone(Working Time)627-6258
- Fax
Slewing Turntable ring Bearing CATEGORIES
- Self-Aligning Bearing
- Slewing Turntable ring Bearing
- Spherical Roller Bearing
- Split Bearing
- Sprial roller bearing
- Square Bore Bearing
- Stainless steel bearing
- Steel ball
- Steering Column Bearing
- Super Precision Bearing
- 6302 Bearing
- 6202rs Bearing
- L44643 Bearing
- 6203z Bearing
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Super Precision Bearings
- Super Precision Angular Contact Bearings
- Super Precision Bearing
- Slewing Ring
- Thrust Tapered Roller Bearing
- Thrust Ball Bearing
- Tapered Roller Bearing
- Tapered Roller Bearing Assemblies
- Double Row Tapered Thrust Roller Bearings
- Railway Rolling Spherical Roller Bearings