30TAC62BSUC10PN7B Bearing 30x62x15mm

Db - Cup Backface Backing Diameter:62.99 mm; Series:19000; Da - Cup Frontface Backing Diameter:66.50 mm; K - Factor7:1.31; Y - ISO Factor9:1.35; e - ISO Factor8:0.44; d:35.001 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:2960 lbf; D:71.438 mm; Cage Type:Stamped Steel;

T min.:-40 °C; Designation of housing:PG206-; T max.:100 °C; d:30 mm; Recommended tightening torque for set screw:11.5 Nm; A1:25 mm; C:19.5 kN; d1:44.1 mm; N:M10; Weight:1.21 kg;

r1a max:0.6 mm; Radial rigidity:852 N/µm; Characteristic inner ring frequency, BPFI:12.2 Hz; Brand:SNR; Precision class:P4; Da max:141.5 mm; Fatigue limit load, Cu:3.7 kN; d1:115.8 mm; B:24 mm; D2:141.51 mm;

Max operating temperature, Tmax:120 °C; d:23.81 mm; Characteristic rolling element frequency, BSF:5.3 Hz; Minimum Buy Quantity:N/A; Inventory:0.0; Dynamic load, C:42.5 kN; Nlim (oil):9,600 rpm; B:19.84 mm; Weight / Kilogram:0; Characteristic outer ring frequency, BPF0:6.16 Hz;

Characteristic rolling element frequency, BSF:9.5 Hz; Da max:68 mm; Static load, C0:11.2 kN; Mass:0.13 kg; Dynamic load, C:13.4 kN; Nlim (grease):8,900 rpm; Characteristic inner ring frequency, BPFI:9.38 Hz; D:72 mm; Characteristic cage frequency, FTF:0.45 Hz; Fatigue limit load, Cu:0.51 kN;

Volume Discount:Available; Bearing Retained:No; Flange Shape:Round Type; Bearing I.D. d(mm):12; Volume Discount:Available; Flange O.D. H(φ):44; Bearing Retained:No; Type:Bearings with Housin; Number of Bearings:Single; Holder Surface Treatment:Clear Anodize;

L:158 mm; N1:22 mm; T min.:-20 °C; Designation of housing:PE206-; H2:82 mm; B1:35.7 mm; J:118 mm; Recommended tightening torque for set screw:8 Nm; A:40 mm; C:19.5 kN;

C0:49.5 kN; A1:67 mm; T min.:-20 °C; N1:50.7 mm; L1:92 mm; s1:38.9 mm; T max.:100 °C; J:230.8 mm; Weight:11.32 kg; A:88.9 mm;

Min operating temperature, Tmin:-20 °C; r1s min:3 mm; Characteristic rolling element frequency, BSF:4.86 Hz; Nref:3,500 rpm; Static load, C0:360 kN; Radial clearance class:CN; E:169.5 mm; Fatigue limit load, Cu:39.6 kN; d:90 mm; Nlim:4,400 rpm;

T max.:100 °C; L1:87 mm; B:42.8 mm; Designation of bearing:EX208-24G2L4; A:36 mm; A1:16 mm; T min.:-20 °C; Designation of housing:FA208-; G:M6x1; s1:39.7 mm;

B - Cone Width:1.9000 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:33200 lbf; Series:755; db - Cone Backface Backing Diameter:4.17 in; Cone Part Number:756A; G1 - Heat Generation Factor (Roller-Raceway)11:177; Aa - Cage-Cone Backface Clearance:0.11 in; Cg - Geometry Factor12

A1:11 mm; Designation of housing:FL203-; s1:23 mm; Designation of bearing:ES201G2; A2:37.1 mm; T max.:100 °C; Weight:0.44 kg; L:57 mm; B:19 mm; B1:28.6 mm;

Width T(mm):60 ～ 80; Housing Material:1045 Carbon Steel; Number of Bearings:Double; Seals:DD (Contact Rubber S; Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; RoHS:6; Days to Ship:8 Days;

Bearing Weight:1.1 Kg; Y - ISO Factor9:1.39; Design Units:METRIC; C0 - Static Radial Rating:198000 N; G1 - Heat Generation Factor (Roller-Raceway):76.7; Db - Cup Backface Backing Diameter:103.12 mm; r - Cup Backface To Clear Radius2:2.54 mm; Cg - Geometry Factor:0.112; a - Effective Center Location3

Type:Bearings with Housin; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Electroless Nickel P; Shape:T-Shaped; Height Indication:Height Selection; C Chamfered:Not Provided; Number of Bearings: